Mold Fogging
Airborne spores reduced, exposed surfaces treated, and a written scope before any work begins.
What Goes Wrong
The method matters as much as the product. These are the failure points that leave mold problems unresolved.
Applying fog to a space with elevated moisture meter readings gives the mold everything it needs to return within weeks.
Readings must confirm the space is dry before fogging is scheduled, otherwise the antimicrobial dissipates and humidity sustains regrowth.
Fogging over saturated drywall or insulation treats the surface only; colonies growing below the face layer are untouched and continue spreading.
Unsalvageable porous materials come out first so the fog reaches the surfaces that actually need treatment, not a barrier of contaminated material.
Without containment, the fog disperses into unaffected areas and disturbed spores can settle in rooms that were previously clean.
Containment barriers and HEPA air scrubbing are set up before fogging so spores stay within the treatment zone and are captured, not spread.
Skipping a post-treatment air test means there is no confirmation that spore counts actually dropped to acceptable levels after fogging.
A clearance air test after fogging confirms spore counts have reached acceptable levels before the space is handed back for re-entry.
Why Choose Us
Fogging is only as good as the process around it. Here is what keeps the work accountable from inspection to clearance.
Every job starts with an on-site moisture and mold inspection so fogging is never scheduled on a space that is still wet.
Containment method, removal steps, and clearance testing are documented in writing before a technician begins any work.
Our partners handle the whole-space fogging jobs that are most common after Gulf Coast water intrusion events.
Post-treatment air testing is part of the remediation sequence, not an optional add-on billed after the fact.
We connect homeowners, landlords, and commercial property managers with vetted local partners across the Baton Rouge area.
The Process
01
A technician checks moisture meter readings, identifies affected materials, and puts the full remediation scope in writing before any treatment is booked.
02
Containment is set up, unsalvageable materials are removed, and dry-fog disinfectant is dispersed through the sealed space with HEPA air scrubbing running.
03
A post-treatment air test confirms airborne spore counts have dropped to acceptable levels before the space is handed back to you.
Pricing Estimates
| Job | Typical cost |
|---|---|
| Single area fogging | $500-$1,500 |
| Whole-home fogging | $2,500-$5,000 |
| Fogging with added cleanup | $3,000-$6,000 |
Describe the mold or odor and we’ll arrange a local technician to inspect, scope, and treat it. You get a written plan before any work begins.