Skip to content

Baton Rouge

Black Mold Removal in Baton Rouge

Get a written scope covering containment, removal, and clearance testing before any work begins.

  • On-Site Inspection First
  • Written Scope Upfront
  • Attics & Crawl Spaces
  • Residential & Commercial
A heavily damaged wall featuring broken and stained white square tiles on one side, contrasting with an older, dark, textured surface on the other.

What Goes Wrong

Where rushed black mold cleanup fails

The gap between a surface clean and a real removal is where mold finds its way back.

Surface-Only Cleaning

Wiping or spraying visible mold leaves colonies alive inside drywall paper and insulation, where moisture keeps them active.

Material Removal

Affected drywall and insulation are cut out and disposed of, not treated in place, so no active colony remains.

No Moisture Source Fix

Cleaning without finding the leak or drainage fault means mold returns within weeks, often in the same spot or deeper.

Source Identification

A moisture check locates the pipe leak, failed caulk joint, or crawl-space drainage issue before any removal starts.

Spores Spread During Work

Disturbing mold without sealing the area first sends spores airborne and into adjacent rooms, widening the contamination.

Containment & HEPA Vacuum

Containment barriers seal the work zone and a HEPA vacuum captures airborne spores before any material is disturbed.

Hidden Duct Contamination

Black mold inside HVAC ductwork circulates spores through every room, making surface cleanup in one area ineffective.

Duct & Cavity Inspection

Inspection goes beyond the visible patch to check wall cavities and ductwork before the area is closed back up.

Beyond Surface Cleaning

Why black mold keeps coming back after cleaning

Killing what you can see on the surface leaves mold alive inside drywall, insulation, and duct cavities.

Bleach and store-bought sprays reach the surface but not the mold growing inside porous materials. Drywall paper and insulation absorb moisture deeply, and mold colonies establish within the material itself. In Baton Rouge’s humid climate, any remaining moisture keeps those colonies active even after the visible patch looks clean. The mold returns because the conditions never changed.

A proper removal process starts with a moisture check to locate the source, a slow pipe leak, a failed caulk joint, or a crawl-space drainage problem. Containment barriers seal the work area, and a HEPA vacuum removes airborne spores before any material is disturbed. Affected drywall and insulation are cut out and disposed of, not treated in place. Wood framing is cleaned and treated with an antimicrobial application.

Hidden black mold in wall cavities or HVAC ductwork requires inspection beyond the visible patch. Duct contamination can circulate spores through every room in the house. Once removal is complete, a dehumidifier brings the area to a stable humidity level, and a post-removal inspection confirms spore counts have dropped to acceptable levels before the space is closed up.

Why Choose Us

Why Baton Rouge Mold Experts for black mold removal?

Every job is scoped in writing before work starts, so you know exactly what is being removed and why.

Written Scope Before Any Work

You receive a written plan covering containment method, materials to be removed, and clearance testing before work is booked.

On-Site Moisture Inspection

Every job starts with an on-site inspection to locate the moisture source, not just the visible mold growth.

Crawl Space & Attic Coverage

The work covers hidden mold in crawl spaces, attics, and water-intrusion areas, not just accessible wall surfaces.

Post-Remediation Clearance Testing

A clearance check confirms spore counts are at acceptable levels before the area is sealed and the job is closed.

Residential & Commercial Service

We take enquiries from homeowners, landlords, and commercial property owners across the Baton Rouge area.

A person in a white protective suit and gas mask sprays a heavily moldy wall with a black bottle.
A severe damp and mold infestation covering the ceiling and upper walls of an indoor room, with peeling paint and water stains.

The Process

From first call to cleared space

  1. 01

    Inspect & Locate

    An on-site visit covers a moisture check, identifies the source, and maps the full extent of the mold growth.

  2. 02

    Scope & Contain

    You receive a written removal plan, then containment barriers and HEPA vacuuming protect the rest of the home during work.

  3. 03

    Remove & Clear

    Affected materials are cut out, framing is treated, and a clearance inspection confirms safe spore levels before close-up.

Pricing Estimates

Typical Black Mold Removal Prices

JobTypical cost
Small contained area$500-$1,500
Single room$1,500-$5,000
Multiple rooms or structural damage$5,000-$30,000
These prices are estimates and often vary with the condition, size and scope of each job. Message or call us for a free, no-obligation quote.
See all prices

Common Questions

Black mold removal questions answered

  • How do I know if the black mold in my house is a serious problem?

    Size, location, and an active moisture source determine severity. A patch under a square foot in a dry, well-ventilated spot is lower risk than growth inside walls, near HVAC systems, or anywhere moisture is still present. If you smell a persistent musty odor or see staining spreading across multiple surfaces, treat it as serious until an inspection says otherwise.

  • Can you still live in a house with black mold?

    It depends on the extent of the growth and whether the affected area can be isolated. Small, contained patches away from living spaces carry lower immediate risk, but widespread growth or mold near air-handling equipment can circulate spores throughout the home. Until remediation is complete, limiting time in affected rooms and improving ventilation reduces exposure.

  • Should black mold be professionally removed?

    Yes, for anything beyond a very small surface patch. Disturbing mold without proper containment releases spores into the air and can spread contamination to clean areas. A professional inspection identifies hidden growth, confirms the moisture source, and uses containment barriers and HEPA filtration to keep spores from spreading during removal.

  • Can I clean black mold myself, or should I hire someone?

    DIY cleaning is only reasonable for a small, isolated surface patch on non-porous material where the moisture source is already fixed. Anything larger, anything inside walls or flooring, or any situation where the moisture source is unknown warrants professional removal. Without containment and proper equipment, scrubbing mold typically spreads spores rather than eliminating them.

  • How much does it cost to have black mold removed?

    Guide prices run from $500-$1,500 (Small contained area) to $5,000-$30,000 (Multiple rooms or structural damage). An on-site inspection produces a written scope before any work begins, so you know the full cost upfront.

  • What makes black mold removal cost more or less?

    The main cost drivers are square footage of contamination, material type (drywall and insulation must be removed; concrete can often be treated), and accessibility. Mold inside wall cavities, attics, or crawl spaces costs more to reach and remediate than surface growth in an open room. Post-remediation clearance testing is a separate line item.

  • Will insurance pay for black mold removal?

    Coverage depends on the cause. Most homeowner policies cover mold that results from a sudden, covered water event like a burst pipe, but exclude mold from long-term leaks or humidity. Review your policy’s mold endorsement and document the moisture source before filing. A written inspection report helps support a claim.

  • How soon can someone come look at the mold?

    We aim to schedule an on-site inspection as quickly as possible after your inquiry. Availability varies by current demand and your location within the Baton Rouge area. Contact us to get a specific appointment time.

  • Which areas do you cover for Black Mold Removal?

    We cover Black Mold Removal in and around Baton Rouge, including Addis, Baker, Central, Denham Springs, Gonzales, Prairieville, Zachary, Walker, Watson, Livingston, Greenwell Springs, Port Allen, Plaquemine, Brusly, Geismar, St. Gabriel and Donaldsonville. If your area isn’t listed, send us a quick message to check.

Tell Us What You’re Seeing

Describe the mold or odor. We schedule an inspection, scope, and removal. You get a written plan before any work begins.

Request an Inspection